IntroductionICU OverviewBIS Monitor OverviewPatient MonitoringMonitor Setup 
Pole Clamp Setup
  • The A-2000 can be mounted on an IV pole or to an anesthesia cart by sliding the shoe-clamp on the back of the monitor into the pole mount clamp.
  • Remove the black screw knob from the clamp and, using the Allen wrench supplied, secure the clamp to the monitor with the set screw provided.
  • Replace the black screw knob.
  • To attach the monitor to a pole, place the pole within the clamp bracket and tighten using the black screw knob.

Footer Image

080-0274 1.00